Overview
Model number
KM 2355 LP
Appliance category
Cooktop
Model reference
Miele KM 2355 LP Gas Cooktop
36" gas cooktop — model notes, common issues and related Miele cooktop service.
Reviewed by Miele Repair Editorial Team · Last reviewed October 21, 2026
Common issues for this model
Igniter keeps clicking
Touch controls flicker or lock out
Error code on one zone
Burner or zone will not heat
Related error codes
Recommended repair service
Troubleshooting resources
Note which burner or zone fails and whether the others still work normally.
Model-information disclaimer.
Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Frequently asked questions
Check the rating label on the underside of the unit; many owners also have it on the warranty card or installation papers. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note which burner or zone fails and whether the others still work normally.
At a glance
| Model | KM 2355 LP |
|---|---|
| Appliance | 36-inch gas cooktop |
| Common symptoms | igniter clicking after the flame should have lit, flickering controls |
| What you can check | Say which burner is affected and mention that it is a gas model when booking. Note whether clicking continues after the flame should have lit. |
| When to call a technician | Book a technician if clicking continues or a control flickers under your finger. Igniters, burner parts and touch controls all need attention. |
Specifications
| Dimensions | Overall width is 35 1/8 inches. Overall depth is 20 3/16 inches. |
|---|---|
| Power | The electrical connection is 120 V, 60 Hz, 15 A. The documented model uses liquid propane. |
| Features | There are five sealed gas burners. A wok ring and trivet are included. The ignition safety control shuts off gas if a burner flame goes out. |
| Controls | Stainless-steel rotary knobs are positioned centrally. |
What sets the KM 2355 LP apart
Propane users get the same five-burner layout here, including a double-insert super burner for big pans. The stainless rotary knobs sit centrally, which keeps the controls grouped. A trivet and wok ring come in the box. In daily use, a pan that wobbles on the super burner usually means the trivet or grate is not seated correctly.
Service notes for the KM 2355 LP
Check the propane tank and regulator first when every burner is weak, since low pressure starves the whole cooktop, and then move to the single-burner valve. A clicking igniter that never lights points to the electrode and its wiring. Note which position is affected, whether the super burner is the only one failing, and where the knob was set. A burner that flickers and then goes out is often tied to the flame-failure safety, which cuts the gas if the flame cannot hold. Gas-side work, including regulator adjustments and tank connections, belongs to a qualified technician, so the owner should stop there and describe the symptom instead.
Book a repair
Tell us about your Miele — we’ll take it from there
Share your model and symptom and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
(844) 459-5005
Phone
(844) 459-5005
Hours
Mon–Sat: 8:00 AM – 7:00 PM
Service area
Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time
Same-day and next-day appointments in most areas.