Skip to content
Same-day and next-day appointments in most areas.
Specialists focused on Miele kitchen appliances.
Call (844) 459-5005
Error Code

Miele Dryer Code F55 Drying Time Exceeded

Plain-language guidance for Miele code F55 on Dryer — symptoms, safe checks, and when to call a technician.

Book a Repair (844) 459-5005
  • Upfront estimates
  • Approval before repair
  • Workmanship warranty
At a glance

Overview

Miele Repair Editorial Team Written by Miele Repair Editorial Team Editorial Team Published October 20, 2026 Updated October 28, 2026
Error code F55
Appliance Dryer
Quick answer

Miele dryers show F55 when the load is still wet after 180 minutes on the residual moisture programme.

Model compatibility

Miele reuses codes across series and model years, so F55 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Laundry still damp after 180-minute maximum drying time.

What F55 tells you

The dryer ran for the full 180 minutes and the laundry still was not dry. Miele notes this happens only with the residual moisture drying programme.

At a glance

Code F55
What it means Laundry still damp after 180-minute maximum drying time.
What you can check Stay at or below the maximum load, spin laundry at a higher speed in the washing machine first, and clean the fluff filters. Rinse them, then dry them thoroughly before they go back in, as damp filters can upset drying.
When to call a technician If F55 keeps coming back after you cut the load, spin faster and clean the filters, book a service visit. Tell the technician which cleaning you already did.

Checklist

  • Load: stay at or below the maximum load size for the chosen programme.
  • Moisture going in: run the washing machine’s spin at a higher speed first.
  • Filters: soiled fluff filters are the third listed cause.

Cleaning the fluff filters, in Miele’s order

  1. Open the door and slide the upper filter out towards you.
  2. Take fluff off every filter and the perforated deflector.
  3. Rotate the lower filter’s yellow knob along its arrow until it clicks; keep holding it while you draw the filter forward.
  4. Use a vacuum with a long crevice tool on the upper air openings.
  5. Clean the plastic with a damp cloth, then rinse under warm running water.
  6. Shake off the water and dry the filters thoroughly; damp filters can upset drying.
  7. Reinsert the lower filter fully and lock it with the yellow knob, seat the upper one, shut the door.

Fluff goes in household waste, not down the drain.

See also

  • F66 for the filter-related fault code.
  • F53 for a drive motor or module fault.

Dryer service in our metro areas

If F55 keeps coming back, call (844) 459-5005 for Miele dryer service in the Miami, New York, Houston, Los Angeles and San Diego areas. Have the code, model number and filter cleaning you did ready.

Source: Miele support: Tumble dryer Fault F55

Caution

Safety warning

Important safety warning

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Get started

Seeing this code on your Miele appliance?

Book a specialist Miele service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Book a Repair (844) 459-5005
Get started

Ready to restore your Miele appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (844) 459-5005
Book a repair

Tell us about your Miele — we’ll take it from there

Share your model and symptom and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

(844) 459-5005
Phone (844) 459-5005
Email info@mieleservicecenter.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.