F30 on a Miele dryer reports different signals for the door and the door contact. Book a repair appointment.
Model compatibility
Miele reuses codes across series and model years, so F30 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What thiscode means
Miele dryer code F30 indicates different signals for the door and the door contact.
The code F30 appears. Miele uses this code for different signals for the door and the door contact.
At a glance
Code
F30
What it means
Miele dryer code F30 indicates different signals for the door and the door contact.
What you can check
Write the code with the model number and cut power at the plug. The door signal mismatch is not something an owner can adjust.
When to call a technician
Request a technician visit for this door signal fault. Leave the dryer unplugged until it is seen, as the guidance advises a repair.
Why the dryer shows F30
Support text for this display message is brief. The fault is labelled technical, left to a repair visit.
Owner checklist
Jot F30 with the model number.
Cut power to the dryer at the plug.
Request a technician visit, as advised.
Other dryer codes
Easily mixed up with F36 (a faulty reed contact on the door), F38 (another module fault), F3 (a short circuit on the drying air sensor).
Service area and booking
Owners in the Miami, New York, Houston, Los Angeles and San Diego metro areas can book a visit for a Miele dryer. The number to ring is (844) 459-5005; read out F30 and the model number when asked.
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Get started
Seeing this code on your Miele appliance?
Book a specialist Miele service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.
