F73 on a Miele coffee machine is a brew unit problem. The reset depends on built-in or countertop type.
Model compatibility
Miele reuses codes across series and model years, so F73, FAULT - 73 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What thiscode means
F73 is a brew unit that cannot move to its start position.
A brew unit that will not travel to its start position produces F73 or FAULT – 73 on a Miele coffee machine. Soiling, or a capsule not seated on capsule models, can be behind it.
At a glance
Code
F73, FAULT – 73
What it means
F73 is a brew unit that cannot move to its start position.
What you can check
Confirm with OK, switch off and unplug for 2 minutes, then rinse the brew unit under running water and set its ejector to the start position. Switch on and refit the unit when the display asks.
When to call a technician
F73 that returns or stays after the brew unit is rinsed, reset and refitted needs a service visit, as does a capsule model with a jammed capsule you cannot clear.
Countertop CM 53xx, 54xx, 55xx, 6xxx and 7xxx
Confirm with OK, then power the machine off and pull the plug for 2 minutes. Take the brew unit out and rinse it under running water. Slide its coffee ejector into the start position and leave the unit out. With the door shut, switch the machine on: the brew unit drive initialises and the message Insert brew unit appears, after which the unit goes back in. A repeat of the message means reducing the coffee quantity or choosing a finer grind.
CM 5000, 5100 and 5200
This happens when the drip tray is taken out while the brew unit is still moving to its start position. Empty and refit the tray, switch to Standby, press Espresso and Coffee together, release, and press OK twice.
Built-in CVA 2xxx to 7xxx
With a grinder and a removable brew unit: confirm with OK, rinse the unit under running water without cleaning agents, set the ejector to the start position, run the machine with only the grounds and water containers in, then refit the unit when Insert brew unit shows.
With a brew unit that will not come out: confirm with OK, switch off, wait approx. 2 minutes, switch on.
Capsule models: confirm with OK, empty the grounds container, take out the carousel and runners, put the container back and look for a capsule jammed beside the capsule plate insert.
Compare with
See F74 for a valve adjustment fault and F4 for a heating system problem.
Coffee machine service in Miami, New York, Houston, Los Angeles and San Diego
When F73 stays on, Miele recommends its customer service or an online repair booking. Call (844) 459-5005 for Miele coffee machine repair in the Miami, New York, Houston, Los Angeles and San Diego metro areas, with the code and model number.
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Get started
Seeing this code on your Miele appliance?
Book a specialist Miele service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.
