The AutoDos outlet is blocked on this Miele dishwasher, so the programme was cancelled and the drain pump started.
Model compatibility
Miele reuses codes across series and model years, so F600 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What thiscode means
AutoDos system blocked; programme cancelled.
What happens when F600 is registered
The drain pump begins to run.
The wash programme is cancelled right away.
The display or LEDs indicate the fault, and the buzzer sequence is repeated 4 times.
After a power-off and power-on, the dishwasher checks again. A fault that is still present is indicated and blocks a restart.
Step one: lower spray arm
Start with the appliance switched off. Take out the lower basket, loosen the spray arm by turning its screw thread anti-clockwise (view from above) and lift it off. A pointed object helps push stuck food particles into the arm itself. Rinse well under running water. When you refit, the filter combination must lie flat in the base of the wash cabinet; turn the thread clockwise until the arrow in the viewing window meets the lock symbol, and spin the arm to confirm it moves freely.
At a glance
Code
F600
What it means
AutoDos system blocked; programme cancelled.
What you can check
Switch the dishwasher off, lift out and rinse the lower spray arm, then open the AutoDos lid, remove the PowerDisk, keep moisture out, clean and dry, and refit a full PowerDisk. Restart after switching power off and on.
When to call a technician
Call for a service visit if the fault is still indicated after cleaning, since it keeps blocking a restart. Mention the AutoDos version and which cleaning you finished.
Step two: AutoDos
Open the AutoDos lid by turning it to Door Lock Open and lift out the PowerDisk. The appliance is fitted with either AutoDos 1.0 or AutoDos 2.0, depending on the model. Keep moisture out of the system. After cleaning and drying, put a full PowerDisk back.
Codes to compare
A clogged lower spray arm is also behind F607, while F601 is a wider AutoDos fault. Pump-related F67 is a separate matter.
Repair for Miele dishwashers in our areas
Still showing the code? Call (844) 459-5005 from the Miami, New York, Houston, Los Angeles or San Diego metro areas. Mention the model, the AutoDos version and which cleaning you finished; see dishwasher repair for more.
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Get started
Seeing this code on your Miele appliance?
Book a specialist Miele service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.
