Skip to content
Same-day and next-day appointments in most areas.
Specialists focused on Miele kitchen appliances.
Model reference

Miele KM 3054 Gas-On-Glass Cooktop

Five-burner gas-on-glass cooktop with a wok burner, where ignition clicks and GasStop shutoffs are the common calls.

Reviewed by Miele Repair Editorial Team · Last reviewed November 8, 2026

At a glance

Overview

Model number KM 3054
Appliance category Cooktop

The Miele KM 3054 is a gas-on-glass cooktop with five sealed gas burners set into a glass surface and rotary knobs on a stainless center panel. Overall width is 37 1/16 inches (942 mm), and a dedicated wok burner sits among the five. Combined output reaches 41,150 BTU on natural gas or 40,900 BTU on LP, and the gas connection is a 1/2-inch NPT fitting. GasStop and Restart tries to relight a flame that goes out, and it shuts off gas flow if relighting fails. The timer runs from one minute to six hours. Customers across the Miami, New York, Houston, Los Angeles and San Diego metro areas should include the full model number from the rating label, the burner that is affected and the fuel type in use.

The dedicated wok burner and the central rotary controls are what separate this cooktop from a flat-knob layout. The knobs sit in one stainless panel, so the owner reads each burner's setting at a glance. GasStop tries to relight a burner that goes out and shuts gas off when it cannot, which is a safety behavior worth knowing. The timer covers one minute to six hours, so it can time long simmers without a separate clock.

Known problems

Common issues for this model

Igniter keeps clicking

Error code on one zone

Burner or zone will not heat

Touch controls flicker or lock out

Diagnostics

Related error codes

Helpful notes

Troubleshooting resources

Note which burner or zone fails and whether the others still work normally.

Model-information disclaimer.

Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.

FAQ

Frequently asked questions

Get started

Need service for this Miele model?

Book a specialist visit with your model number ready. We confirm compatibility, diagnose on site, and provide a clear estimate before any repair.

At a glance

ModelKM 3054
Appliance36-inch gas-on-glass cooktop
Common symptomsigniter keeps clicking; error code on one zone; burner or zone will not heat; touch controls flicker or lock out
What you can checkNote which burner or zone fails and whether the others still work normally.
When to call a technicianIf the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit.

Service notes for the KM 3054

A burner that will not light or keeps clicking is an ignition or gas-flow check. The technician looks at the igniter electrode, the burner cap and the gas valve before any control. Water or spill residue on the electrode is a common cause, so the owner should dry the burner area before calling. A burner that will not heat once it lights needs the cap seating and the gas pressure at the supply checked. An error code on one zone shows which burner is under test. Do not keep pressing a knob to relight a burner over and over; if GasStop shuts gas off, report it rather than retrying.

Get started

Ready to restore your Miele appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us about your Miele — we’ll take it from there

Share your model and symptom and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

(844) 459-5005
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.