Skip to content
Same-day and next-day appointments in most areas.
Specialists focused on Miele kitchen appliances.
Model reference

Miele PFD 102i Semi-Integrated Commercial Dishwasher

Semi-integrated ProfiLine dishwasher with AutoOpen drying; leak codes and a silent control panel are the usual calls.

Reviewed by Miele Repair Editorial Team · Last reviewed November 2, 2026

At a glance

Overview

Model number PFD 102i
Appliance category Dishwasher

The Miele PFD 102i is a semi-integrated commercial dishwasher from the ProfiLine series, holding 13 place settings with a separate front panel. An integrated water softener runs on reactivation salt, so the reservoir needs regular top-ups. Start can be delayed by up to 24 hours, and eight wash programs are chosen with buttons. AutoOpen opens the door at the end of a cycle to help drying. The 120 V version needs 110/120 V at 60 Hz on a 15 A circuit. For Miami, New York, Houston, Los Angeles and San Diego metro areas, add the symptom, the full number from the rating label and any leak code to the booking form.

The semi-integrated layout means the front panel is a separate piece, so it can be matched to cabinetry while the unit sits inside the run. The delay start and AutoOpen drying suit a busy kitchen where a load finishes after staff have left. The integrated softener removes the need for a separate softening step. Day to day, the salt reservoir is the upkeep item most likely to be missed.

Known problems

Common issues for this model

Dishes not getting clean or dry

Cycle stops early or will not start

Door latch or control panel problems

Leak or leak-protection code

Diagnostics

Related error codes

Helpful notes

Troubleshooting resources

Note the cycle used, whether water is left in the tub, and any code or flashing light.

Model-information disclaimer.

Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.

FAQ

Frequently asked questions

Get started

Need service for this Miele model?

Book a specialist visit with your model number ready. We confirm compatibility, diagnose on site, and provide a clear estimate before any repair.

At a glance

ModelPFD 102i
Appliance24-inch semi-integrated commercial dishwasher
Common symptomsdishes not getting clean or dry; cycle stops early or will not start; door latch or control panel problems; leak or leak-protection code
What you can checkNote the cycle used, whether water is left in the tub, and any code or flashing light.
When to call a technicianIf the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit.

Specifications

CapacityAccommodates 13 place settings.
PowerThe 120 V version requires 110/120 V, 60 Hz, 15 A.
InstallationDesigned for semi-integrated built-in installation with a separate front panel.
FeaturesIntegrated water softener uses reactivation salt. AutoOpen assists drying. Includes eight wash programs.
ControlsPrograms are selected using buttons. Start can be delayed by up to 24 hours.

Service notes for the PFD 102i

A technician looks at the spray arms and the filter first when dishes come out dirty, since a blocked filter or spray arm leaves soil behind. When a leak code appears, the inlet valve, the drain hose and the float or leak sensor are checked in that order. A control panel that stops responding points to the button board and its connector. The owner can safely note the program in use, whether the delay start was set, and the code on the display. Check the salt reservoir and the drain hose for kinks before calling, and leave the front panel in place while the unit runs.

Get started

Ready to restore your Miele appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us about your Miele — we’ll take it from there

Share your model and symptom and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

(844) 459-5005
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.