Skip to content
Same-day and next-day appointments in most areas.
Specialists focused on Miele kitchen appliances.
Model reference

Miele PFD 101 Freestanding Commercial Dishwasher

Freestanding commercial dishwasher with a salt-regenerated softener; water left in the tub and leak codes are the usual calls.

Reviewed by Miele Repair Editorial Team · Last reviewed November 2, 2026

At a glance

Overview

Model number PFD 101
Appliance category Dishwasher

The Miele PFD 101 is a freestanding commercial dishwasher that holds 13 place settings in a cabinet 598 mm wide. Its integrated water softener runs on reactivation salt, and the reservoir holds about 4.4 lb (2 kg) of salt, so the salt level matters before each load. The hot-water inlet should stay at or below 140°F (60°C), and the drain hose reaches up to 13 feet 1 1/2 inches. Commercial kitchens in the Miami, New York, Houston, Los Angeles and San Diego metro areas often see water left in the tub first. Give the booking form the symptom, the complete rating-label number and the stage where the cycle stopped.

A freestanding commercial unit like this one carries its own water softener, so the salt reservoir and the softener cycle belong to routine upkeep. The manual calls for Miele service at least once a year, which is more regular attention than most home dishwashers receive. The drainage head is limited to 3 feet 3 3/8 inches, so the drain height at the installation matters when water sits in the tub. In practice a missed salt top-up shows up as spotting or weak cleaning before it shows up as a fault.

Known problems

Common issues for this model

Water left in the tub after the cycle

Cycle stops early or will not start

Door latch or control panel problems

Leak or leak-protection code

Diagnostics

Related error codes

Helpful notes

Troubleshooting resources

Note the cycle used, whether water is left in the tub, and any code or flashing light.

Model-information disclaimer.

Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.

FAQ

Frequently asked questions

Get started

Need service for this Miele model?

Book a specialist visit with your model number ready. We confirm compatibility, diagnose on site, and provide a clear estimate before any repair.

At a glance

ModelPFD 101
Appliance24-inch freestanding commercial dishwasher
Common symptomswater left in the tub after the cycle; cycle stops early or will not start; door latch or control panel problems; leak or leak-protection code
What you can checkNote the cycle used, whether water is left in the tub, and any code or flashing light.
When to call a technicianIf the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit.

Specifications

DimensionsWidth is 23 9/16 inches (598 mm).
CapacityAccommodates 13 place settings.
InstallationMaximum hot-water inlet temperature is 140°F (60°C). Maximum drain-hose length is 13 feet 1 1/2 inches (4 m). Maximum drainage delivery head is 3 feet 3 3/8 inches (1 m).
FeaturesAn integrated water softener uses reactivation salt.
CareThe salt reservoir holds approximately 4.4 lb (2 kg) of salt. The manual calls for Miele service maintenance at least once a year.

Service notes for the PFD 101

A technician checks the salt reservoir cap and the softener valve first when spotting or hardness complaints come with a leak code, because a loose cap or a stuck softener valve can let brine reach the sump. For water left in the tub, the drain pump, the filter basket and the drain hose run are the usual suspects, especially when the drain sits above the drainage head limit. A door latch or panel problem points to the latch switch and its wiring. Owners can safely note the salt level, the stage where the cycle stalled and the code shown. Do not pour salt into the tub, and do not run the softener with the cap open.

Get started

Ready to restore your Miele appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us about your Miele — we’ll take it from there

Share your model and symptom and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

(844) 459-5005
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.