Skip to content
Same-day and next-day appointments in most areas.
Specialists focused on Miele kitchen appliances.
Model reference

Miele KM 360 LP Four-Burner Propane Cooktop

Propane four-burner cooktop where a burner that will not light or a clicking igniter usually starts with supply pressure.

Reviewed by Miele Repair Editorial Team · Last reviewed November 2, 2026

At a glance

Overview

Model number KM 360 LP
Appliance category Cooktop

The KM 360 LP is the propane version of a four-burner cooktop, 585 mm wide and 515 mm deep, with a maximum combined burner output of 25,600 BTU. Rotary dial controls light each sealed burner through single-handed electronic ignition, and the unit needs 120 V, 60 Hz and 15 A. The LP minimum supply pressure is 10 inches WC, so the tank regulator is part of any diagnosis. This Miele cooktop is the LP item, and the natural-gas version carries a different item number. Across the metro areas we cover, a burner that will not heat is the first thing owners describe. In the booking form, list the symptom, the full number from the rating label and any code shown.

The LP version carries its own item number, 26360051USA, and the natural-gas item is 26360050USA, so the rating label has to match the tank supply before parts are ordered. Rotary dials suit owners who prefer knobs to touch panels. One press of the dial lights a burner, and the sealed burners keep spills away from the internal parts.

Known problems

Common issues for this model

Burner or zone will not heat

Error code on one zone

Touch controls flicker or lock out

Igniter keeps clicking

Diagnostics

Related error codes

Helpful notes

Troubleshooting resources

Note which burner or zone fails and whether the others still work normally.

Model-information disclaimer.

Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.

FAQ

Frequently asked questions

Get started

Need service for this Miele model?

Book a specialist visit with your model number ready. We confirm compatibility, diagnose on site, and provide a clear estimate before any repair.

At a glance

ModelKM 360 LP
Appliance24-inch four-burner propane cooktop
Common symptomsburner or zone will not heat; error code on one zone; touch controls flicker or lock out; igniter keeps clicking
What you can checkNote which burner or zone fails and whether the others still work normally.
When to call a technicianIf the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit.

Specifications

DimensionsUnit width is 585 mm. Unit depth is 515 mm.
PowerMaximum combined burner output is 25,600 BTU. Requires 120 V, 60 Hz, 15 A.
InstallationLP minimum supply pressure is 10 inches WC.
FeaturesHas four sealed burners.
ControlsUses rotary dial controls. Supports single-handed electronic ignition.

Service notes for the KM 360 LP

A burner that will not heat or an igniter that keeps clicking sends a technician to the propane supply pressure and the burner orifice before the controls. The owner can safely check that the tank valve is open, that the regulator is connected and that the dial sits fully in its position. Do not test for a leak with a flame; use soapy water on the fittings and shut the supply if bubbles form. Keep children clear of the rotary dials while the unit is being checked.

Get started

Ready to restore your Miele appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a repair

Tell us about your Miele — we’ll take it from there

Share your model and symptom and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

(844) 459-5005
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.